SHIB COINGECKO

Sets the transmission frequency.

Unlock frequency field.

MORSE 交易所

Sets the output power level in watts.

Unlock power field.

CRYPTO ARENA HOCKEY SEATING CHART

Selects the time after which the transmitter's output will be muted if the transmitter is transmitting silence.

Click 'Mute RF' to manually mute your transmitter.

Unlock mute rf button.

ROLLBLOCK CRYPTO PRICE PREDICTION

Sets interval between FSK messages.

Enter your FSK text into the box. This will be converted into morse code. Accepts text of up to 16 characters.

MOCHI MARKET 交易所

Enables/disables Power Scheduling.

TANGIBLE EXCHANGES

Selects the output power that will be set during the scheduled interval

SHIBAFAME APP

Selects the time at which the output power will change from normal power to scheduled power.

CALCULATE COINBASE FEES

Selects the time at which the output power will change from scheduled power to normal power.

KMIC EXCHANGES

Selects the source for the exciter. - Internal: selects internal generator. - External: selects MPX BNC input.

MERCURYO CRYPTO

Selects the input source.

RFT EXCHANGES

Controls the pre-emphasis. Options are Off, 50 uS (Europe) and 75 uS (USA).

APF COIN APP

Selects mono or stereo.

CRYPTO HOPPER

Loads the audio processing preset.

CRYPTO OFF RAMP

Configures the Alarm pin as an Alarm (Open Collector) or as an Analog Output (0 to 5 volts) to interface with Telemetry equipment.

DMINT ARC 20 交易所

Selects the parameter that will be reported as an analog voltage in the alarm pin. VOut = 5/1.2*CurrentValue/NominalValue. Please refer to the manual for further information.

SCA LOGIN

Selects which detector is the source for the alarm.

DOGEGROK APP

Selects the threshold at which the modulation level alarm will be activated. This parameter accepts values from 1000 to 100000.

ANONTOKEN V2 APP

Sets the threshold at which the forward power alarm will be activated. This parameter accepts values from 0 to 2000.

DDK EXCHANGES

Sets the threshold at which the reverse power alarm is activated. This parameter accepts values from 0 to 2000.

TXGP APP

Sets the threshold at which the PA Temperature alarm will be activated. This parameter accepts values from 0 to 150

BLKC EXCHANGE

Sets how long the error condition must occur for before an alarm is triggered. This parameter accepts values from 2 to 600.

ANIMVERSE 交易所

Sets how long the error condition must have stopped for before an alarm is un-triggered. This parameter accepts values from 2 to 600.

KLEVER CRYPTO

Selects if an e-mail will be sent when the alarm state changes.

SHAPESHIFT APP

Selects whether the output is active high or active low.

RADIO HERO

Enables/disables the trigger.

CARROT TOKEN LOGIN

Determines the action performed upon trigger.

GOLD DAO EXCHANGES

Selects if an e-mail will be sent when the alarm state changes.

FOMODOTA EXCHANGES

Sets the message that will be sent when the Trigger changes to ON. Accepts text of up to 300 characters.

AGB EXCHANGE

Enables/disables logging to RS232.

LAMBOANDMOON EXCHANGES

Enables/disables logging to file.

SHROOM FINANCE LOGIN

Enables/disables logging messages to a remote UDP logging/syslog server.

BIDA BEADHOUSE APP

Sets the IP address where the log messages should be sent via UDP. Accepts IPv4 address in the form www.xxx.yyy.zzz.

TOOLS EXCHANGES

Sets the port where the log messages should be sent via UDP. Disable UDP to change. This parameter accepts values from 1 to 10000.

SWHAL APP

Sets the method used for sending emails. For simplicity, choose BW Broadcast.

S WALLET PROTOCOL EXCHANGES

Sets the email address of the sender. The unit will send e-mails through this address. Accepts text of up to 64 characters.

PRINT MINING LOGIN

Sets the recipients of the emails. Multiple addresses must be separated by commas. Accepts text of up to 99 characters.

GTRAX EXCHANGES

Sets the IP address of the SMTP server. Accepts text of up to 64 characters.

STEPFINANCE EXCHANGE

Sets the port number of the SMTP server. This parameter accepts values from 1 to 1024.

COLLETRIX 交易所

Sets the username for SMTP authentication. Must be left blank if no authentication is required. Accepts text of up to 64 characters.

TREMENDOUS COIN APP

Sets the password for SMTP authentication. Must be left blank if no authentication is required. Accepts text of up to 64 characters.

THE REVOLUTION TOKEN APP

Sets the maximum number of emails allowed to be sent by the unit in a single day to stop spamming from intermittent errors. This parameter accepts values from 1 to 1000.

Click 'Test e-mail' to trigger a test run of the e-mail settings above. If you do not receive the e-mail within a few minutes, check the settings are correct and try again.

POLIES TOKEN

Enables/disables the RS232 remote.

BABYBSC LOGIN

Sets the RS232 baud rate.

IS PLAY-DIGITAL.NET SAFE

Enables/disables the telnet server.

SHIBA TITIAN EXCHANGES

Sets the telnet TCP port. Disable Telnet to change. This parameter accepts values from 1 to 1024.

LEGALBLOCK LOGIN

Sets the date of the Real Time Clock. Accepts date in format dd/mm/yy.

METAGO 交易所

Sets the time of the Real Time Clock. Accepts time in format hh:mm.

PENG APP

The physical location of this device (e.g., `TX Site 1, Rack 2'). Accepts text of up to 64 characters.

FREEMOON TOKEN EXCHANGES

The contact details for the person who manages this device. Accepts text of up to 64 characters.

BRAZIL NATIONAL FOOTBALL TEAM FAN TOKEN APP

This allows the time-out before the screensaver starts to be adjusted between 15s and 30 minutes.

SOLANA20 EXCHANGE

Enables/disables the screen lock code.

GARBAGE APP

Sets the screen lock code.